![background image](http://html1.mh-extra.com/html/aandd/ad-8922/ad-8922_instruction-manual_3078886013.webp)
11
Continued
Class Item
Parameter
Description
0
ON when 0
data
data
1
ON when 1
0
ON when positive or 0
polp
*
Polarity
1
ON when negative
0
ON when the stabilization indicator is turned off
5tbp
Stability
1
ON when the stabilization indicator is turned on
0
OFF when
e
or
-e
0erp
Over
1
ON when
e
or
-e
0
Data refresh is complete when ON
→
OFF
5trp
Strobe
1
Data refresh is complete when OFF
→
ON
0
Approx. 10 ms
1
Approx. 20 ms
bcd
BCD
Available only
when the
BCD output
is installed.
5trt
Strobe pulse
width
2
Approx. 50 ms
Strobe pulse width after data refresh
0
No comparison
1
Comparison, excluding "near zero" when the value is
stable or overloaded
2
Comparison, including "near zero" when the value is
stable or overloaded
3
Continuous comparison, excluding "near zero"
4
Continuous comparison, including "near zero"
Cp
Comparator
mode
5
Contact-outputs the second header information of the
data received. (Applicable to AD-4212, GP and GX-K)
0
OFF
bep
LO buzzer
1
ON
Selects whether or not to sound the
buzzer when LO.
0
OFF
bep-
OK buzzer
1
ON
Selects whether or not to sound the
buzzer when OK.
0
OFF
Cp fnc
Comparator
Available only
when the
comparator
output is
installed.
bep
HI buzzer
1
ON
Selects whether or not to sound the
buzzer when HI.
0
2-digt output
Converts the consecutive 2 digits,
with the digit selected in
5el
as the
least, to voltage and outputs.
an
Analog output
mode
1
3-digt output
Converts the consecutive 3 digits,
with the digit selected in
5el
as the
least, to voltage and outputs.
0
Selects the first digit as the least.
1
Selects the second digit as the least.
2
Selects the third digit as the least.
3
Selects the fourth digit as the least.
4
Selects the fifth digit as the least.
aout
Analog
output
Available only
when the
analog output
is installed.
5el
Analog output
digit selection
5
Selects the sixth digit as the least.
Factory setting
*
For Software version 1.10, the parameter
0
is "ON when negative" and the parameter
1
is "ON when
positive or 0".
The software version is displayed as "
p
x.xx" for approx. one second before entering the function
setting mode.