19
１０
BCD OUTPUT (AD-8922-01)
Outputs the weighing data received from the weighing instrument in BCD format, along with the polarity
(+/-) and the data status (stable/unstable and over/under).
Using the STROBE signal, the data can be read easily. BUSY input enables the data to be held or
prevents data refreshing during the reading operation.
The logic of data, status and strobe can be switched in the function setting.
Note: When the AD-8922-01 is installed, the RS-232C serial interface can not be used.
１０
-
１
BCD Output Specifications
Accessories
I/O plug applicable to the BCD output port
1 pc.
Instruction manual
1 copy
Cable to connect to a weighing instrument (Length: Approx. 2 m) 1 pc.
D-Sub 25-pin to DIN 7-pin (AX-KO577A-200)
Note: A substitute cable may be provided as specified when ordering the AD-8922.
D-Sub 9-pin to DIN 7-pin (AX-KO1786-200)
DIN 7-pin to DIN 7-pin (AX-KO507-W200)
Note: When the AD-8922-01 is installed, the communications cable provided with the AD-8922
will not be used.
Panel view
BCD output port (BCD-OUT)
Plug (Provided)
Part name
Product number
Manufacturer
Over mold cover
DX30M-50-CV
Plug unit (Soldered type)
DX40M-50P
Hirose Electric
Note:
The products above are subject to be replaced with the equivalent.
