Operators and Maintenance Manual
Display
EEM AM4 FE H01
Page
6/19
Copyright:
Auto & Aero Technologies Sp. z o.o.
Mazowiecka 10/5, 20-723 Lublin, Poland
■
email: [email protected]
■
www.aatech.pl
Fig. 2. EEM AM4 Display outline drawing
3.3. Mounting
The display should be located conveniently
within the pilot’s view
in the
control panel in the cockpit. The dimensions of the mounting hole to be
cut in the panel is 156 x 164 mm. It is recommended that the display is
installed from the front side the control panel. The display is to be fastened
to the panel by means of four M3 screws that are located symmetrically to
the centre of the mounting hole in the spacing of width: 165 mm and 2 x
67.5 mm height (Fig. 3).
