Operators and Maintenance Manual
Display
EEM AM4 FE H01
Page
11/19
Copyright:
Auto & Aero Technologies Sp. z o.o.
Mazowiecka 10/5, 20-723 Lublin, Poland
■
email: [email protected]
■
www.aatech.pl
A
B
C
D
Fig. 6. Display of the FE H01 software version
On client’s request,
warning and alarm threshold values may be set for
some of the above parameters according to the specification provided by
the aircraft supplier. Default threshold values are listed in Table 2.
As the aircraft operates within “normal” range of the parameter in
question, the instrument displays values in green, and status diodes are
green. If the threshold level is being exceeded, the instrument informs the
pilot by changing both the colour of displayed figures and the colour of
status diodes. Exceeding the alarm threshold is additionally indicated by
the diodes flashing red. The pilot can switch off flashing by pushing the
encoder knob. Figure 7 presents the idea of colour codes and
warning/alarm indication.
Thus, information on the status of a flight parameter is presented in two
ways:
