12
13
•
The AstroPure air purifier (1) has the following main components:
•
Swivel castors with locking device (2)
•
Power plug (3) / LCD/PLC: Power plug with On/OFF switch at the back of the unit
•
Air inlet (4)
•
Air outlet (5)
•
Fan (6)
•
Pre-filter (7)
•
HEPA filter (8)
•
OptionalUV-C stage (9)
•
Control panel (10)
•
The control unit consists of the following individual parts:
•
ON / OFF switch (11)
•
Operating status light device ON (12)
•
Volume flow controller (13)
•
Status display pre-filter (14)
•
Status display HEPA filter (15)
•
LCD panel (16)
Decommissioning in the event of maintenance
The device must be switched off and disconnected from the power supply for
maintenance and repair.
5. Storage, transport and assembly
Storage
The storage conditions for the AstroPure air purifiers are:
•
Storage in a dry, protected environment, if possible in the original packaging.
•
Storage temperature range: -30 ° C to 40 ° C
Air humidity rH. <90%, no condensable humidity.
Unpacking
Remove the securing straps, stretch wrap, and card board packing material from the
AstroPure 2000 Air Cleaner. Disposal of the packaging material must obey the local
waste disposing regulations.
Castor rolls
Castor rolls are fastened on the bottom with bolts (M10, M13 wrench).
Transport
Only move heavy loads with suitable means of transport.
Installation of Air Inlet and Air Outlet ductwork (optional)
Installation of Air Inlet and Air Outlet ductwork needs to be carried out by qualified
personnel only.
Installation area
The installation surface must be smooth and level and have sufficient load-bearing
capacity.
Filter and consumables
The AstroPure air purifiers are equipped with the following filter stages:
•
Pre-filter
•
HEPA filter
•
Optional: UV-C stage
DANGER: CRUSHING
HAZARD
Avoid hard knocks and jerky
loads. Risk of filter damage.
Secure the load against
unintentional rolling away.
12
WEAR SAFETY SHOES
