PAGE 11
I
NSTRUCTION MANUAL
AAPRODUCTS INC.
F
or Technical Support Call:1-888-806-3972
/
626-332-4245
S
TEP 1
Find the T-shaped Bolt ( T-shaped Mechanism comes OEM standard ) on the vehicle
’ s roof top. Installing the
Base Bracket: Put two Carriage Bolts M8*30 on the Base Bracket upside down. Then slide the Adapter Bracket
underneath the T-shaped Bolt.
( See FIG 12 )
S
TEP 2
Set position for the Adapter Base: Two of the upside down bolts should also goes through the Adapter Base. Connecting
the Mounting Bases with the Adapters. Tighten two Carriage Bolts M8*30 on the Adapter with Nuts & Washers M8.
( See FIG
13-1 & 13-2 )
After installing the rack set, adjust all the Cross-Bars to align with each other and tighten all fasteners. Insert the Rubber
Sealing Strip into the Cross-Bar’
s upper & lower channel to reduce wind-noise. Cut the right length as needed.( See FIG 13-3 ).
Roof Top
T-Shaped Bolt
Carriage Bolt M8 * 30
Slide
FIG 13-1
FIG 13-1
Insert the Rubber Sealing Strip into the
Cross-Bar’s
Upper & Lower Channel
to reduce
wind-noise. Cut the right length as needed.
FIG 12
Nut
&
Washer M8
FIG 13-2
DODGE RAM PROMASTER FULL-SIZE CARGO VAN
