64
Owner’s manual
Removing the rear wheel
1. Ensure that the battery is not connected to the system any more.
To that end, remove the battery from the vehicle.
2. Remove the cable holders (on the back of the dropout and on
the bottom side of the left chain stay) using an appropriate
Allen key.
3. Disconnect the plug connectors for the power and control cables
leading to the motor.
5
3
2
4
7
6
1
4. Loosen and remove the hub axle nuts using a 19-mm wrench.
5. Loosen and remove the retaining screw of the torque support on
the left-hand side of the dropout.
6. Remove the torque support from the A2B by pushing it from the axle.
7. Pull the rear wheel from the frame now, while, at the same time,
removing the chain from the freewheel.
Summary of Contents for Obree
Page 1: ...1 Owner s manual Obree...
Page 39: ...39...
