background image

48

Owner’s manual

• 

Do not expose the battery to any kind of 
moisture (water, rainwater, snow, etc.) 
during storage!

• 

Charge the battery before storage and 
check the state of charge every 3 months.

• 

Store the battery in a cool and dry 
place where it is safe from damage and 
unauthorised access.

• 

To obtain an optimum battery life 
cycle, the battery should be stored at a 
temperature from 18°C to 23°C and a 
humidity of 0 to 80 per cent. The state of 
charge should be 70 per cent.

• 

Check the battery's state of charge every 
3 months during storage and charge it to 
obtain 70 per cent, if required.

6.2.3 Safety instructions and warnings 
on the charging process

• 

Only charge the battery in a ventilated, 
dry and dust-free environment.

• 

Never charge the battery in the presence 
of or close to flammable liquids or gases.

• 

Do not expose the battery to any kind of 
moisture (water, rainwater, snow, etc.) 
during charging.

• 

Do not charge it in rooms in which the 
battery could come into contact with 
moisture.

• 

The battery may only be charged at 
temperatures between 0°C and 40°C. If 
you try to carry out a charging process 
beyond this temperature range, 

• 

The battery's automatic system 
automatically switches off the charging 
process.

• 

The battery reaches its maximum life 
cycle if charged at temperatures between 
10°C and 30°C.

• 

Only use the intended chargers to charge 
the battery. Your specialist dealer will give 
you the relevant information.

• 

Using an inappropriate charger may lead 
to malfunctions and result in a shorter 
life cycle of the battery. There is also a 
danger of fire and explosion.

• 

After the end of the charging process, the 
charger must first be disconnected from 
the mains socket and then from the battery.

• 

Ensure adequate air circulation as soon 
as the battery is charged.

• 

Only charge the battery if supervised.

• 

Damaged batteries must not be 
recharged or used again.

• 

Damaged battery chargers (damage to the 
plug, casing, cable) must not be used.

Summary of Contents for Obree

















































































Reviews: