29
Use of the Walk assist / Walk assist button
•
The pushing aid is used by pressing the controller button [1].
Thereby, the motor is switched on and moves your Pedelec at a
maximum speed of 6 km/h as long as you press and hold button
[1]. This is shown in field [13] as white bar element.
•
If the buttons [1] or [3] are released, the motor is switched off. It
may only be switched on when the Pedelec/Handbike is stopped.
•
If the pedals are moved during pushing, the sMMI automatically
changes to the mode of the preset assistance level (see section
3.2.4) so that the selection activated there is available for you.
•
If the pedals are not moved any longer, the sMMI switches back to
the pushing aid.
•
If the sMMI is switched off, the activation of the pushing aid will
remain in the programme and will instantly be operational when the
sMMI is switched on next time. However, you first have to pedal 2
to 3 times until the motor moves the Pedelec when the button [1]
or [3] is pressed.
•
The pushing aid's maximum speed can be adjusted by your
specialist dealer according to your requirements.
Summary of Contents for Obree
Page 1: ...1 Owner s manual Obree...
Page 39: ...39...
