41
Never mount the motor without the
torque support [20]. This would lead to a
total loss (twisting off the cable). In this
case, all warranty or guarantee claims
shall become void.
Carry 5 cable ties along with you apart
from your repair tool to be able to refasten
any loose cables during a tour securely.
Mounting or removing the drive wheel
can best be carried out if the Pedelec is
turned upside down (put on handlebar
and saddle). Remove the sMMI fixed to the
handlebar first to avoid damage.
5.6. Cleaning of the motor and sMMI
Never use cleaning benzine, thinners,
acetone or similar agents when cleaning
the motor and sMMI. Never use abrasive
or aggressive cleaning agents. Only use
commercially available household cleaning
agents and disinfectants (isopropyl alcohol)
instead.
5.6.1 Motor
•
Your Pedelec's motor should be cleaned
regularly to remove dirt, ideally using a
dry brush or a damp (not wet) cloth. Do
not use running water, such as a water
hose or even a high-pressure cleaner for
cleaning. Riding in the rain and on wet
ground, however, are possible without
any problems.
•
Ingressing water may destroy the motor.
Therefore, always make sure when
cleaning that neither liquids nor moisture
get into the motor.
•
Do not clean the motor when warm, e.g.
immediately after a tour. Wait for the
motor to cool down. Otherwise this could
lead to damage.
•
If the motor has been demounted, e.g.
for cleaning, it must never be held or
transported on the cables, otherwise
there is a risk of cable break.
•
If the motor has been removed from the
Pedelec's frame (see section 4.1), the
plug from the motor and the socket of the
cable leading to the battery back must be
checked for contaminations or cleaned
before connecting.
Summary of Contents for Obree
Page 1: ...1 Owner s manual Obree...
Page 39: ...39...