SUPERVISOR PASSWORD / USER PASSWORD
This allows you to set the password. the mainboard
defaults password disabled.
Enter/Change password :
Enter the current
password,at the prompt key-in your new password
(up to eight alphanumeric characters), press <Enter>.
At the next prompt, confirm the new password by
typing it and press <Enter> again.
Disable password :
Press <Enter> key instead of
entering a new password when the ‘Enter Password’
dialog box appears. A message will appear
confirming that the password is disable.
If you set both supervisor and user passwords, only the
supervisor password allows you to enter the BIOS
SETUP program.
CAUTION :
If you forget your password, you must
disable the CMOS by turning power off and set JP8
‘open‘. Then reload the system.
IDD HDD AUTO DETECTION
This allows you to detect IDE hard drives‘
parameters and enter them into ‘Standard CMOS
Setup’
automatically.
If the auto-detected parameters displayed do not
match the ones that should be used for your hard
drive, do not accept them. Press <N> to reject the
values and enter the correct ones manually on
the Standard CMOS Setup screen.
56
Summary of Contents for ATC-5030
Page 59: ...5030 010000 80120 59...