Swap Floppy
This item allows you to determine whether
Drive
enable the swap floppy drive or not.
Boot Up Floppy
During POST, BIOS will determine if the
Seek
floppy disk drive installed is 40 tracks (360K)
or 80 tracks (720K, 1.2M, 1.44M)
Enabled
BIOS searchs for floppy disk drive to
determine if it is 40 or 80 tracks
Disabled BIOS will not search for the type of
floppy disk drive by track number
Boot Up
This allows you to determine the default
NumLock Status
state of the numeric keypad. By default,
the system boots up with NumLock on.
Boot Up System
Selects the default system speed - the
Speed
normal operating speed at power up.
Typematic Rate
This determines if the typematic rate is to be used.
Setting
When disabled, continually holding down a key
on your keyboard will generate only one instance.
Typematic Rate
When the typematic rate is enabled, this
(Chars/Sec)
section allows you select the rate at which
the keys are accelerated.
6
6 characters per second
8
8 characters per second
10
10 characters per second
12
12 characters per second
15
15 characters per second
20
20 characters per second
24
24 characters per second
30
30 characters per second
40
Summary of Contents for ATC-5030
Page 59: ...5030 010000 80120 59...
