Drive A
The category identifies the types of floppy
Drive B
disk drive A or drive B that have been
installed in the computer.
None
No floppy drive installed
360K, 5.25 in 5.25“ PC-type 360KB capacity
1.2M, 5.25 in 5.25“ AT-type 1.2MB capacity
720K, 3.5 in
3.5“ double-side 720KB capacity
1.44M, 3.5 in 3.5“ double-side 1.44MB capacity
2.88M, 3.5 in 3.5“ double-side 2.88MB capacity
Floopy 3 mode
This is the Japanese standard floppy drive.
support
The standard stores 1.2MB in a 3.5“ diskette
Video
The category selects the type of video adapter
used for the primary system monitor. Although
secondary monitors are supported, you do not
have to select the type in Setup.
Halt On
The category determines whether the computer
will stop if an error is detected during power up.
No errors When the BIOS detects a non-fatal
error the system will be stopped and
you will be prompted
All errors The system boot will not be stopped for
any error that may be detected
All, But
Keyboard
The system boot will not stop for a
keyboard error, it will stop for all other
errors
All, But
Diskette
The system boot will not stop for a disk
error, it will stop for all other errors
All, But
Disk/Key
The system boot will not stop for a disk
or keyboard error, it will stop for all
other errors
36
Summary of Contents for ATC-5030
Page 59: ...5030 010000 80120 59...
