CHAPTER 3 AWARD BIOS
SETUP
This chapter explains the system BIOS setup, and how to
update new BIOS. All BIOS screens showed in the following
pages are default values, your system dealer will set up these
values according to your demand of computer.
ATC-5030 uses Flash ROM to make BIOS easier to be updated
by the floppy disk-based program and to committe Microsoft
Windows 95 plug & play feature.
The update CMOS process is mechanical power off (or unplug
the power cord) to ensure there is no power to the mainboard,
firstly. Set JP8 to ‘open’, then the CMOS is cleared. Reset is set
JP8 to ‘close’, power on the power switch (or plug the power cord).
1-2
NORMAL
2-3
CLEAR CMOS
＊
is default setting
JP8
NORMAL CLEAR
31
Summary of Contents for ATC-5030
Page 59: ...5030 010000 80120 59...
