A to Z Rubber Stamps RAPIDPRINT A Series, Manual

Page: 46 / 122

Retaining Pawls And Retaining Pawl Shaft:
-Remove one of the two "E" rings securing the shaft.
-Tap the shaft so it protrudes from one side of the frame. Take hold and turn as you
pull it out, allowing the pawls to fall out.
Wheels And Swing Assembly:
To allow the removal of the wheels and swing as one unit, it is best to use a "floating
shaft". This is made by cutting an old wheel shaft to the exact outside dimensions of
the swing. Use this "floating shaft" to push out the existing shaft until the swing falls
free of the frame.
-Loosen wheel shaft locking screw and disengage retainer.
01/04/2012 46