A.O. Smith TWI 35-130, Instruction Manual

Page: 11 / 62

Instruction manual TWI 35-130 G/TWI 45-190 G 9
Chapter Target groups Description
2. Operation of the device This chapter describes the operation of the device.
3. Installation This chapter describes the installation activities to be
carried out before de
fi nitely starting up the device.
4. Conversion to another
category Conversion to another category is not possible.
5. Fill This chapter describes how to fi ll the device.
6. Drain This chapter describes how to drain the device.
7. Start up This chapter describes how to start up the device.
It further describes the general heating cycle of the
device.
8. Shut down This chapter describes how to shut down the device for
a shorter or longer period.
9. Errors This chapter is mainly meant for the installation
engineer and the service and maintenance engineer.
It describes the errors of the device. These errors are
shown on the display. A table gives the possible cause
and solution. However, an end user can also
fi nd
additional information about the device here.
10. Maintenance This chapter describes how to determine the frequency
for maintenance activities. Both the end user and the
service and maintenance engineer are responsible
for regular maintenance. They shall make clear
appointments about this. Remark If the device is not
regularly maintained, the warranty will become null and
void.
1.6 Notation system
1.7 Overview of this
document
This manual makes use of the following notation system:
Remark
Attention: important notice.
Caution
Ignoring this text may result in damage of the device.
Warning
Ignoring this text may lead to serious damage of the device and to
situations that are dangerous to people.
The table provides an overview of the content of this document.
Content of this document