NEED HELP? GIVE US A CALL
833.232.9711
NEED HELP? GIVE US A CALL
833.232.9711
DO...
Insert tubing all the way (.95") to prevent leaking.
Wet end of tubing for an easy install into inlets and outlets.
Cut excess tubing to prevent crimping, kinks, loops or folds.
Depth to insert tubing
Diagram is actual size.
INSTALLATION GUIDE
8
9
1
Brass Tee to Manifold “INLET”
(1/4" white tubing)
Take the white tubing leading from the
brass tee and insert it into the Manifold
port labeled “INLET”. Push the tubing
all the way in until it stops.
WARNING:
Faucet will leak
if restrictor is not
installed.
3
Manifold to Tank
(3/8" white tubing already attached to Tank)
Take the 3/8" white tubing leading from
the storage Tank and insert it into the
Manifold port labeled “Tank”. Push the
tubing all the way in until it stops.
STEP 6 - Connect tubing
5
Faucet to Drain Connector
(3/8" red tubing from faucet)
Take the 3/8" red tubing from faucet
and insert it all the way into the drain
connector.
2
Manifold to Faucet
(3/8" white tubing already attached to faucet)
Insert the 3/8" white tubing (from
STEP 3 - Install RO faucet) from the
faucet into the Manifold port labeled
"FAUCET".
4
Air Gap to RO Membrane
(1/4" red tubing from faucet)
1. Insert restrictor into the end of the red tubing.
2. Attach 1/4" red tubing to the 90° elbow until it stops.
3. Attach 1/4" 90° elbow to the membrane drain port.
DO NOT...
Cut tubing too short. Always double-check
measurements before cutting.
Bend, crimp or kink tubing.
Discard excess tubing.
1
2
1/4" WHITE BRASS TEE TO MANIFOLD
3/8" WHITE MANIFOLD TO TANK
1/4" RED MEMBRANE TO FAUCET
3/8" RED FAUCET TO DRAIN CONNECTOR
3
4
Hose Connections
HOT
COLD
