18
WebGUI Control
AVAILABLE TRIGGER ACTIONS
Transmitter Video Mute Off
Transmitter Record Start
Transmitter Record Stop
Transmitter Follow Output EDID
User Config Tab
The WebGUI and Telnet username/password are set on this page. Two management levels are
available:
“Administrator”
and
“General User”
. The administrator username (
“admin”
) cannot
be changed.
The
“Administrator”
user has access to all tabs and can change all settings. The
“General User”
only has access to the “Live” tab to allow easy remote video stream viewing.
System Setting Tab
This tab provides system information, network configuration options, system configuration backup/
restore/reset, and firmware update functions.
1. Network:
IP mode may be switched between Static IP or DHCP. In Static IP mode the IP, netmask
and gateway addresses may be manually set. When in DHCP mode, the unit will attempt to connect
to a local DHCP server and obtain IP, netmask and gateway addresses automatically. Please press
“Save”
after making any changes to the IP configuration or mode.
Note:
The unit’s default IP address is 192.168.1.50. If the IP address is changed then the IP address
required for WebGUI/Telnet access will also change accordingly.
2. Web Timeout (Minute):
Select the length of time to wait before logging the user out of the WebGUI
due to inactivity. Available range is from 1 to 120 minutes, or disabled.
3. Download Current Configuration:
The current system configuration, including routing and
settings, may be saved as an XML file to a PC. Click the
“Download”
button to save the current
system configuration to your local PC.
Summary of Contents for ANI-41STREAM
Page 34: ...32 CONNECTION DIAGRAM ...
Page 42: ...THIS PAGE IS INTENTIONALLY LEFT BLANK ...
