13
WebGUI Control
EDID Setting Tab
This tab provides the option of four standard EDIDs, one sink sourced EDID and four customer
uploaded EDIDs that can be assigned to the digital input ports. The names of the four customer
uploaded EDIDs can changed if desired.
Note:
The EDID used by the VGA port is fixed, and cannot be changed.
1. Customer EDID Settings:
• Save Name:
To change the name of a custom EDID, type the new name in the space provided,
then click on the
“Save Name”
button.
• Download:
To save an existing custom EDID to your local PC please press the
“Download”
button next to the EDID you would like to save. Depending on your browser settings you will
either be asked where to save the downloaded file, or the file will be transferred to the default
download location on your PC.
• Upload:
To upload a custom EDID, please click the
“Upload”
button next to the Customer
EDID Settings item you would like to change. An EDID Upload window will appear, allowing
you to locate and upload the preferred EDID file (*.bin format) from a local PC. Once the
correct file has been selected, please click the
“Upload”
button in the window, and the file will
be transferred to the unit.
2. Sink EDID Download:
To save the EDID from the connected HDBaseT™ display to your local
PC, select the sink from the dropdown list then press the
“Download”
button. Depending on your
browser settings you will either be asked where to save the downloaded file, or the file will be
transferred to the default download location on your PC.
3. Set EDID Input Content:
Click on the switch select how to assign EDIDs to the unit’s inputs
(Appoint/All). Selecting
“Appoint”
allows for a different EDID to be assigned to each input, selecting
“All”
allows for a single EDID to be assigned to all inputs. After making the mode selection, click on
the input button to open the EDID Source selection window. Select the new EDID source to use, from
the choices on the right, and the change will occur immediately.
Note:
In most cases, assigning a new EDID to an input will cause the affected input to
briefly blink
out while the source adapts to the new information.
Summary of Contents for ANI-41STREAM
Page 34: ...32 CONNECTION DIAGRAM ...
Page 42: ...THIS PAGE IS INTENTIONALLY LEFT BLANK ...
