A-Neuvideo ANI-41STREAM, Instruction Manual

Page: 32 / 44

30
Serial & Telnet Commands
COMMAND DESCRIPTION
SET USER N1 EDID DATA
N2

Upload a new EDID (in hex format) for use as the specified User
EDID.
Available values for N1 :
1~4 [User EDID number]
N2 = {EDID data} [Comma delimited hex pairs]
GET USER N1 EDID DATA

Show the current contents of the specified User EDID as hex data.
Available values for N1 :
1~4 [User EDID number]
GET IN N1 EDID

Show the EDID currently being used on the specified input.
Available values for N1 :
1 [DisplayPort input]
2 [USB-C input]
3 [HDMI input]
SET RECORD MODE N1

Start or stop recording video to the designated destination.
Available values for N1 :
ON [Start recording]
OFF [Stop recording]
GET RECORD MODE

Show the current recording state.
SET RECORD OVERWRITE
N1

Enable or disable record overwrite support.
Available values for N1 :
ON [Enable overwriting]
OFF [Disable overwriting]
GET RECORD OVERWRITE

Show the current state of record overwrite support.
SET RECORD MEDIA PATH
N1

Set the recording target media device.
Available values for N1 :
AUTO [Automatic selection]
USB [Record to USB]
NFS [Record to NFS]
CIFS [Record to CIFS]
GET RECORD MEDIA PATH

Show the currently selected recording target media device.
SET SCHEDULE RECORD
MODE N1

Enable or disable scheduled recordings.
Available values for N1 :
ON [Enable scheduled recordings]
OFF [Disable scheduled recordings]