22
A
NEU
VIDEO
Serial & Telnet Commands
COMMAND
DESCRIPTION AND PARAMETERS
SET RECORD MEDIA PATH N1
Set the recording target media device.
Available values for
N1
:
AUTO [Automatic selection] NFS [Record to NFS]
USB [Record to USB] CIFS [Record to CIFS]
GET RECORD MEDIA PATH
Show the currently selected recording target media device.
SET SCHEDULE RECORD MODE N1
Enable or disable scheduled recordings.
Available values for
N1
:
ON [Enable scheduled recordings]
OFF [Disable scheduled recordings]
GET SCHEDULE RECORD MODE
Show the current state of scheduled recording support.
SET RECORD RESOLUTION N1
Set the resolution to use when recording (streaming channel 1).
Available values for
N1
:
320x240 [QVGA] 1920x720 [720p]
640x480 [VGA] 1920x1080 [1080p]
GET RECORD RESOLUTION
Show the resolution used when recording (streaming channel 1).
SET RECORD BITRATE N1
Set the maximum bitrate (in Kbps) to use when recording (streaming channel 1).
N1
= 1~6000 [Bitrate in Kbps]
GET RECORD BITRATE
Show the current maximum bitrate (in Kbps) used when recording (streaming
channel 1).
SET RECORD FRAMERATE N1
Set the frame rate to use when recording (streaming channel 1).
N1
= 1~60 [Frames per second]
GET RECORD FRAMERATE
Show the frame rate used when recording (streaming channel 1).
Note:
Commands will not be executed unless followed by a carriage return. Commands are
NOT
case-sensitive.
