17
A
NEU
VIDEO
Serial & Telnet Commands
COMMAND
DESCRIPTION AND PARAMETERS
SET SYSTEM REBOOT
Reboot the unit.
GET FW VER
Show the unit’s current firmware version.
GET COMMAND VER
Show the unit’s current command version.
GET MAC ADDR
Show the unit’s MAC address.
GET MODEL NAME
Show the unit’s model name.
GET MODEL TYPE
Show the unit’s product type.
GET USER CONFIG
List the unit’s current configuration information.
GET ALL COMMAND INDEX LIST
Show the unit’s full console command index list.
SET UART 1 RESET
Reset the unit’s RS-232 control port’s settings to the factory defaults.
SET UART 1 BAUDRATE N1
Set the baud rate of the RS-232 control port.
Available values for
N1
:
4800 [4800 baud] 38400 [38400 baud]
9600 [9600 baud] 57600 [57600 baud]
19200 [19200 baud] 115200 [115200 baud]
GET UART 1 BAUDRATE
Show the current baud rate of the RS-232 control port.
GET UART LIST
List all available RS-232 ports.
SET IP MODE N1
Set the IP address assignment mode.
Available values for
N1
:
0 [Static IP]
1 [DHCP]
GET IP MODE
Show the current IP address assignment mode.
GET IPCONFIG
Show the unit’s current IP configuration information.
SET IP ADDR N1
Set the unit’s static IP address.
N1
= X.X.X.X [X = 0~255]
GET IP ADDR
Show the unit’s current IP address.
SET NETMASK N1
Set the unit’s static netmask.
N1
= X.X.X.X [X = 0~255]
GET NETMASK
Show the unit’s current netmask.
SET GATEWAY N1
Set the unit’s static gateway address.
N1
= X.X.X.X [X = 0~255]
GET GATEWAY
Show the unit’s current gateway address.
GET TELNET MAXIMUM USER
Show the maximum number of users allowed to connect
simultaneously via Telnet.
SET WEBGUI PASSWORD N1
Set WebGUI administrator password.
N1
= {Password} [16 characters max]
GET WEBGUI PASSWORD
Show the current WebGUI administrator password.
GET HOSTNAME
Show the unit’s current hostname.
SET WEBGUI LOGIN TIMEOUT N1
Set the WebGUI inactivity timeout value.
Available values for
N1
:
0 [No timeout]
1~60 [Timeout in minutes]
GET WEBGUI LOGIN TIMEOUT
Show the current WebGUI inactivity timeout value.
