13
WebGUI Control
Note:
Time synchronization occurs automatically when the unit is first powered on, and every 24 hours afterwards, if an NTP server has
already been defined. Synchronization requires a live connection to the internet.
• Server Time:
Shows the unit’s current time and date.
2. Time Configuration:
• Date & Time:
The unit’s time and date can be manually configured here if an internet connection, or NTP server is not available.
Click on the calendar icon ( ) to open the time and date configuration screen and select the preferred values. After entering a
new time and date, click the
“Save”
button to store it in the unit and start the clock running.
3. Daylight Saving Time Configuration:
Enable or disable the use of DST adjustments for the unit’s time.
Note:
Enabling Daylight Saving Time while outside the configured DST range will result in no change to the current time.
• Start Time:
Set the month, week, day and time for the start of DST in the current time zone.
• End Time:
Set the month, week, day and time for the end of DST in the current time zone.
• Adjust Time:
Set the amount of time to add when DST is active.
Trigger Setting Tab
This tab allows user to define the action taken when any of the 8 trigger pins within the Trigger Terminal Block are activated.
1. Set Trigger Input:
Use the dropdown next to each Trigger (1~8) to assign an action to perform when that trigger is activated.
AVAILABLE TRIGGER ACTIONS
Transmitter HDBT OUT Select DP
Transmitter HDBT OUT Select USB-C
Transmitter HDBT OUT Select HDMI
Transmitter HDBT OUT Select VGA
Transmitter Auto Switch On
Transmitter Auto Switch Off
Transmitter Audio Mute On
Transmitter Audio Mute Off
Transmitter Video Mute On
Transmitter Video Mute Off
Transmitter Record Start
Transmitter Record Stop
Transmitter Follow Output EDID
A
NEU
VIDEO
