14
WebGUI Control
User Config Tab
The WebGUI and Telnet username/password are set on this page. Two management levels are available:
“Administrator”
and
“General
User”
. The administrator username (
“admin”
) cannot be changed.
The
“Administrator”
user has access to all tabs and can change all settings. The
“General User”
only has access to the
“Live”
tab to
allow easy remote video stream viewing.
System Setting Tab
This tab provides system information, network configuration options, system configuration backup/restore/reset, and firmware update
functions.
1. Network:
IP mode may be switched between Static IP or DHCP. In Static IP mode the IP, netmask and gateway addresses may
be manually set. When in DHCP mode, the unit will attempt to connect to a local DHCP server and obtain IP, netmask and gateway
addresses automatically. Please press
“Save”
after making any changes to the IP configuration or mode.
Note:
The unit’s default IP address is 192.168.1.50. If the IP address is changed then the IP address required for WebGUI/Telnet access
will also change accordingly.
2. Web Timeout (Minute):
Select the length of time to wait before logging the user out of the WebGUI due to inactivity. Available range
is from 1 to 120 minutes, or disabled.
A
NEU
VIDEO
