![background image](http://html.mh-extra.com/html/a-j-antunes/utx-200/utx-200_manual_447216009.webp)
UNIVERSAL TOASTER UTX-200
9
P/N 1010904 Rev. 14 04/06
McDonald’s
OPERATION (continued)
Figure 10. Breakfast Mode Toasting Route
(Bagels or Muffins only)
Figure 11. Lunch Mode Toasting Route
(Heels and Crowns only)
SELECT
SELECT
Crowns
Heels
Muffins or
Bagels
Figure 12. Inserting Product into UTX-200
Bun Thickness Compression Control Knob
Settings
During Lunch operation
only
, the UTX-200 uses a Bun
Thickness Compression Control knob for proper toast-
ing of heels and crowns (Figure 13).
For best toasting quality, the recommended Bun
Thickness Compression Control knob setting is 3.
NOTE: The Bun Thickness Compression Control
knob is not used during breakfast mode.
2 = 17/32" (13.5 mm) 9/32" (7.1 mm)
5 = 5/8" (15.9 mm) 3/8" (9.5 mm)
4 = 19/32" (15.1 mm) 11/32" (8.7 mm)
3 = 9/16" (14.3 mm) 5/16" (7.9 mm)
1 = 1/2" (12.5 mm) 1/4" (6.4 mm)
COMPRESSION
CROWN
HEEL
6 = 21/32" (16.7 mm) 13/32" (10.3 mm)
7 = 11/16" (17.5 mm) 7/16" (11.1 mm)
1
3
2
5
4
6
7
Recommended
Bun Thickness
Compression
Control knob set-
tings (used in
Lunch mode ONLY)
Figure 13. Bun Thickness Compression Control
NOTE: The UTX-200 and the CTX-200 are designed
to sit side by side. The CTX-200 can be placed on
the right or left side of the UTX-200 by putting the
Bun Thickness Compression Control knob on the
side of the UTX-200 that is NOT flush against the
CTX-200.
This allows you to customize unit placement to
your preference by placing the Bun Thickness
Compression Control knob on either side of the
UTX-200. If used, the CTX-200 must be placed on
the opposite side of the UTX-200 Bun Thickness
Compression Control knob.