UNIVERSAL TOASTER UTX-200
10
P/N 1010904 Rev. 14 04/06
McDonald’s
OPERATION (continued)
Light Buns Dark
PRGM
MOTOR
PLTN
UT
I/R
NEXT
PREV
SELECT
BREAKFAST/LUNCH
ADJUST
Figure 14. Adjusting Toasting Quality
Adjusting Toasting Quality
The toasting quality of the UTX-200 can be adjusted to
provide a lighter or more darkly toasted product. Follow
these steps to adjust toasting quality.
1. Open the Front Cover to access the Control Panel
(Figure 1).
2. Press and release the
ADJ
button (Figure 14)
3. Use the
PREV
and
NEXT
buttons to adjust the
toasting quality to lighter or darker respectively
(Figure 14).
NOTE: Pressing the PREV button decreases toast-
ing darkness. Pressing the NEXT button increases
toasting darkness. There are ten adjustment incre-
ments in each direction. Two bars will be lit when
the adjustment is in the center.
4. Test one or two buns to verify that the product is
toasting at the desired quality
5. If the toasting quality needs further adjustment,
repeat Steps 2 through 4 as necessary.
6. This setting is maintained when the unit is pow-
ered off.
7. Press the
PRGM
button to exit.
Viewing the Program Mode Settings
Follow these steps to view the Program Mode:
NOTE: It is recommended that these settings be left
unchanged.
1. From any operation mode (
Bagel Ready
,
Bagel
Wait
,
Muffin Ready
,
Muffin Wait
,
Lunch
Ready
or
Lunch Wait
) open the Front Cover
and press and hold the
PRGM
button for 3 sec-
onds.
2. The following appears on the display:
Program Muffin
(or
Bagel
or
Lunch)
Press Select
3. Press the
Select
button and use the
NEXT
or
PREV
button to scroll through the following cat-
egories (Refer to the
Universal Toaster Settings
section for more information on these categories):
•
Speed
•
Platen Mode
(Default setting is Lunch Only)
•
Language
(Default setting is English)
•
Units (F/C)
(Default setting is F)
•
Platen Temp
•
IR Lower %
•
IR Upper %
4. When the desired category is reached, press the
Select
button
ONCE
. This will cause the value to
blink, indicating it is in Edit mode.
5. Press the
PREV
or
NEXT
button while the value
is blinking, to change the setting.
6. When you are finished viewing settings, press the
Program
button or wait 10 seconds and the unit
will return to the Operation Mode (
Bagel Ready
,
Bagel Wait
,
Muffin Ready
,
Muffin Wait
,
Lunch Ready
or
Lunch Wait)
.
NOTE: The unit will exit the Program Mode after 10
seconds of inactivity.
WARNING
Do NOT press the NEXT or PREV buttons at this
time. This may change the default settings and
affect the normal operation of the unit!
