Operating and Assembly Instructions – A.B.S. Flexilo ECO for wood pellets
General Information
Subject to technical change
Issue 09/2016
Page 3 of 32
©A.B.S. Silo- und Förderanlagen GmbH
1
Note
Please read these Instructions prior to assembling the A.B.S. Flexilo ECO
for wood pellets.
1.1 Symbols used
Danger! This symbol identifies a hazard that could cause serious bodily injury or
even death if appropriate precautionary measures are not taken.
Caution: Risk of injury or damage to equipment!
Dangerous situations that can cause minor to serious bodily injury or damage to
equipment and property.
Risk of electric shock! Failure to observe the warning can endanger life and
limb through contact with electricity.
References and tips
1.2 Normative references
•
ÖNORM M 7137: Wood pellets - Requirements for storage of pellets at the ultimate
consumer
•
EN 303-5: Heating boilers for solid fuels
•
EN14961-2: Wood pellets for non-industrial use
•
ENplus – Handbook for the certification of wood pellets for heating use, version 2.0
•
Sample fire ordinance 2005
•
VDI guideline 3464 (green print 2012): storage of wood pellets by ultimate consumer
1.3 Pellet quality, Intended use
The Flexilo ECO for wood pellets is intended solely for the storage of wood pellets. The
maximum acceptable bulk good temperature is 50 °C.
If you want to store other materials you need to get in touch with the manufacturer
necessarily.
We assume use of quality pellets complying with EU-Norm EN 14961-2
respectively
complying with DINplus that have a diameter of 6 mm. According to the DEPV-guidelines
only certified ENplus A1 quality pellets are recommended.
Quality class A2 is used in larger boilers in excess of 100 kW like in the commercial area.
The quality classes are distinguished primarily by the ash content and the permissible ash
softening temperature. The boiler manufacturer must permit the use of the A2 quality pellets
in their boilers.
