A & T Internationale Xserve, Service Source

Page: 77 / 165

Xserve (Late 2006) Take Apart — Drive Interconnect Backplane
77
Replacement Note: When installing the backplane, lower the backplane into the enclosure
at a slight angle (as shown), and carefully align the front edge of the backplane with the four
backplane alignment slots in the enclosure. Be careful not to let any backplane components
come into contact with the standoffs or the enclosure as you install the backplane.
Then rotate the backplane downward and over the four mushroom-shaped standoffs. Finally,
slide the backplane in the direction of the arrow shown to fully seat the backplane in the
enclosure.