A & T Internationale Xserve, Service Source

Page: 14 / 165

Xserve (Late 2006) Take Apart — Hard Drive Module
14
Formatting the Hard Drive
If you replaced the hard drive with a new one, format the new hard drive by following the steps
presented here:
Start up from the Install Disc that came with your server, and choose the language. 1.
From the menu bar, choose Utilities > Disc Utility. 2.
To format the primary drive, use the Disc Utility on the Install disc. 3.
Click the Partition tab. 4.
Click on Options, and verify GUID is selected if this is the startup drive. 5.
Name the volume “Macintosh HD.” 6.
Apply the change by clicking the Partition tab. 7.
Leave the Disc Utility application open, and restore the backed up files from the image you 8.
created before removing the hard drive.