A & T Internationale Xserve, Service Source

Page: 13 / 165

Xserve (Late 2006) Take Apart — Hard Drive Module
13
Part Location
Drive bay 1 Drive bay 2 Drive bay 3
Procedure
Make sure the drive being replaced is not in use by any application and is not being shared 1.
by the Xserve. (See the Mac OS X Server documentation for information about shared drives.)
Unmount the drive (by using the command-line tools or by dragging the volume icon to the 2.
Trash).
Press the handle on the front of the drive module so that the handle pops out. Wait for the 3.
upper LED on the drive to go out. Then grasp the drive handle, and pull the drive module
out of the Xserve.
Replacement Note: Press and release the handle on the replacement drive to open it, and slide
the module into the bay until it is firmly seated. Then press the handle in flush with the front
panel. The disk status light will turn green to indicate normal operation.