52
NCORE MANUAL
VER. 2 REV. 1
Emergency
Emergency stop procedure
This procedure allows a safe disconnection in an emergency:
1.
Turn off the battery switch.
2.
Disconnect the power supplies to all ACDC and DCDC modules.
3.
Disconnect the batteries.
If we do not have the battery management module, we start directly with step 2.
Deactivation procedure
If you are managing the NCore remotely, via the web interface, it is possible to disable all NCore outputs and also the
battery module. To do this, you must follow these instructions:
1.
Press the "STOP" button shown in the following image:
2.
A pop-up will appear asking us if we are sure, we click OK.
Figure 32 – Emergency stop procedure
Figure 33 – STOP deactivation button
1
2
3
Summary of Contents for NCORE
Page 1: ...1 NCORE MANUAL VER 2 REV 1...
