15000-MNL-01 Rev A
30
range. Please contact a technical
representative if this error persists.
SYSTEM_FAULT_COM_ERROR
Communications Error.
Check USB cable connection to the host
PC. Unplug the unit and wait 10 seconds
before reapplying power to the system. If
the error persists, please contact a
technical representative.
SYSTEM_FAULT_SYSTEM_ERROR
System Error.
Unplug the unit and wait 10 seconds
before reapplying power to the system. If
the error persists, please contact a
technical representative.
SYSTEM_FAULT_CHANNEL_ERROR
Channel Error.
Unplug the unit and wait 10 seconds
before reapplying power to the system. If
the error persists, please contact a
technical representative.
SYSTEM_FAULT_NOVALUM_HAL_ERROR
Novalum HAL Error.
Unplug the unit and wait 10 seconds
before reapplying power to the system. If
the error persists, please contact a
technical representative.
SYSTEM_FAULT_SYSCOM_HAL_ERROR
Interlock HAL Error.
Unplug the unit and wait 10 seconds
before reapplying power to the system. If
the error persists, please contact a
technical representative.
SYSTEM_FAULT_INTERLOCK_CVR_REED_OPEN
The Fiber Access Cover is
open.
Verify that the fiber access cover is
completely closed, and nothing is in-
between the cover and the LDI. See
Figure 12.
SYSTEM_FAULT_OVER_FREQUENCY
Over-Frequency.
Decrease the frequency at which the
laser is being pulsed.
SYSTEM_FAULT_I2C_TIMEOUT
I2C Timeout.
Unplug the unit and wait 10 seconds
before reapplying power to the system. If
