STEp 7
Place the Router Base Support Plate #07 over the lip of the template
with the recessed bolt holes facing up. The router base only fits flush
one way, so if your holes don’t line up, rotate the support plate 180 degrees.
Attach the plate using the #09 Template Bolts, tightening the bolts to the
top of the jig walls in the same alternating fashion. Secure the assembled jig
in the vise with the buffer tube hole closest to you.
STEP 8
Install the 1/4” End Mill #11 into your router making sure the end mill
is very tightly secured in the collet to prevent it from creeping out while
milling. Adjust the cutting depth by using the depth gauge on the Rear
Shelf Pocket Template #06 labeled MAIN. Adjust the depth of the router
so the tip of the end mill is just below the first hash mark on the template.
Re-insert and tighten the top rear Jig Bolt #08 through the lower if it was
previously removed or loosened during step #5.
-
8 -
Summary of Contents for AR-15 Easy Jig
Page 1: ...AR 15 Easy Jig MANUAL...
