STEP 13:
Adjust the end-mill to the appropriate length to mill the rear shelf by
using the depth gauge on the Trigger Pocket Template #05 labeled
REAR.
Adjust your router depth so the end mill is touching the first notch / hash mark
on the template depth gauge. Use the same milling process of connecting
the holes and milling as outlined in Steps 9, 10 and 11.
wARNING
: Do not mill out the smaller hole (trigger slot) of the Rear Shelf
Template #6 during this step. If you removed or loosened the top rear
Jig Bolt in step 12, be sure to reinsert and tighten the jig bolt before
moving to the next step.
X
-
12 -
Summary of Contents for AR-15 Easy Jig
Page 1: ...AR 15 Easy Jig MANUAL...
