STEP 3
Prepare the 3/8” Drill #13 and 3/8” Drill Stop #12 to the appropriate length
by using the Rear Shelf Pocket Template #06 labeled MAIN. Securely
tighten the drill stop collar. The drill bit should be touching the bottom of the
depth gauge. Before drilling out the 8 holes, secure the jig assembly in your vise.
STEP 4
Drill out the 8 holes checking the drill bit length using the template
depth gauge after each hole. If you’re using a hand drill, make sure you
drill straight down—do not lean at any angle.
TIP:
Slow down and reduce the
pressure when your Drill Collar gets close to touching the Drill Block. Avoid
allowing the stop collar to touch the drill block in order to prevent the drill stop
collar from sliding and over-drilling the hole. We suggest using cutting fluid
while drilling and a shop-vac to periodically clear out the chips as you drill.
-
6 -
Summary of Contents for AR-15 Easy Jig
Page 1: ...AR 15 Easy Jig MANUAL...
