clean up tips
During milling, it’s possible for small chips to rub between the jig plates and
the lower. Aluminum residue from the chips can rub onto the anodized finish
of the lower. The anodized finish on the lower is much harder than the raw
aluminum chips. You can use a sponge with a mildly abrasive green Scotch
Pad to remove marks left on the lower by the chips. Dip the sponge in soapy
water and gently rub the lower to remove any marks.
If you milled a raw lower, do not apply a finish coat to the lower until after
you have installed your lower parts kit and performed a function test.
If you milled an anodized or Cerakoted lower, it is not necessary to apply a
finish to the milled raw aluminum area.
Show off your work
There’s a great sense of satisfaction in building your own firearm. Join
our community of builders on Facebook where you can display your work,
see what others have done, and keep up with 80% news and new product
announcements. Join us at www.facebook.com/80percentarms.
Contact Us
Our dedicated support team is available by phone, email, and walk-in to
answer your questions and for any service needs.
80 Percent Arms Inc.
3480 W Warner Ave., Suite N
Santa Ana, CA 92704
Phone sales and support: (949)-354-2767
Email support: [email protected]
Legal Notice
“Easy Jig” is a registered trademark or trademark of 80 Percent Arms Inc. The
product covered by this manual is protected under copyright, patent, and other
intellectual property rights. The router based Easy Jig® milling system is patented
and is the exclusive intellectual property of 80 Percent Arms Inc. Unauthorized use
of our router milling system, in whole or in part, is prohibited. Patent violations are
strictly enforced. All images and content in this manual are copyright © 80 Percent
Arms Inc. Unauthorized duplication or distribution of the contents of this manual
without the prior written permission of 80 Percent Arms is prohibited. No part of
this manual may be reproduced, stored in a retrieval system, or transmitted, in any
form, or by any means, electronically, mechanically, by photocopying, or otherwise,
without the prior written permission of 80 Percent Arms Inc.
-
16 -
Summary of Contents for AR-15 Easy Jig
Page 1: ...AR 15 Easy Jig MANUAL...
