4titude Ltd, The North Barn, Surrey Hills Business Park, Damphurst Lane, Wotton, Dorking, Surrey, RH5 6QT, UK
Tel: +44 (0) 1306 884885 Fax: +44 (0) 1306 884886 [email protected] www.4ti.co.uk
Page | 24
5.3 “Power-down” Mode
If the unit remains idle in stand-by mode for a prolonged time the system
will go into power down mode and the heating platen will be switched off
(factory set at 10 hours). The amber LED is switched off.
The display shows the temperature decrease until it reaches 45°C, after
this “LO” will be displayed.
By pressing any key the unit will automatically begin to warm up the
heating platen to the pre-selected sealing temperature.
Refer to section 4.2 to change the time after which the unit switches into
power-down mode.
5.4 Drawer Locking
It is possible to lock the when the unit is not used to prevent damage or
dust contaminating the internal parts of the unit.
To lock the drawer, proceed as follows:
•
While pressing the
key close the drawer
•
The plate lifting platform moves up and the drawer is locked
•
Switch OFF the unit
•
To unlock the drawer switch ON the unit.
Note:
Do not use this function whilst the unit is in transport
