4titude Ltd, The North Barn, Surrey Hills Business Park, Damphurst Lane, Wotton, Dorking, Surrey, RH5 6QT, UK
Tel: +44 (0) 1306 884885 Fax: +44 (0) 1306 884886 [email protected] www.4ti.co.uk
Page | 33
10
SHIPPING INSTRUCTIONS
When shipping the unit the original packaging must be used to prevent damage
to the instrument.
The manufacturer accepts no responsibility for damage incurred unless the unit
is correctly packed as described below and transported using the original
packaging.
1. Before shipping remove the plate carrier(s) from the unit.
Note:
If left inside the unit the plate carriers may cause severe damage
to the sealer!
2. Switch off the unit.
3. Pull out the drawer.
4. Place card board sheet (provided) between the underside of the drawer
and the top of the lifting platform inside the unit.
5. Push drawer in.
6. Replace cardboard insert in drawer
Note:
if the unit is shipped without the cardboard insert in the drawer,
the front panel can be damaged during shipping. Also note, do NOT
lock the drawer, as described on page 23.
7. Place the sealer between the two foam inserts inside the original
shipping box.
8. Place the accessories in the smaller cardboard box and place on top of
the foam inserts.
9. Close the box using a suitable adhesive tape.
