4IPNET HSG320 User Manual Download Page 48

Page: 48 / 194

User’s Manual

HSG Wireless Hotspot Gateway ENGLISH



External RADIUS Related Settings



802.1X Authentication:

Enable /Disable 802.1X authentication for users authenticated through this

Server.



Username Format:

Select the format of the user login information required to be sent to the external

RADIUS Server. You may choose to send username in

Complete

( Postfix),

Only ID

Leave

Unmodified

. Please note that if Leave Unmodified option is selected, the system will send the input as is.



NAS Identifier:

This attribute is the string identifying the NAS originating the access request. System will

send this value to the external RADIUS server, if the external RADIUS server needs this.



NAS Port Type:

Indicates the type of physical port the network access server is using to authenticate the

user. System will send this value to the external RADIUS server, if the external RADIUS server needs

this.



Account Delay Time:

This attribute adds flexibility for the HSG to process accounting requests in the

time specified. Default is set at 0.



Service Type:

This attribute indicates the type of service the user has requested or the type of service to

be provided, required for some RADIUS servers that only accepts specified service types.



Class-Group Mapping:

This function is to impose a Group on a RADIUS class attribute sent from the

RADIUS server. When the clients classified by RADIUS class attributes log into the system via the

RADIUS server, each client will be mapped to an assigned Group.



DM & CoA Settings:

This function allows administrator to assign users to receive Disconnect Messages

/ Change of Authorization from the server and sessions can be terminated instantly. Click

Configure

enter the IP addresses of the users.



Attributes Priority:

This section shows the Standard RADIUS attributes which include Session Timeout,

Idle Timeout and Acct Interim Interval; and WISPr Vendor Specific Attributes. These attributes are

predetermined, and if needed, choose Overwrite Server

’s Setting to make changes.

Summary of Contents for HSG320



































































































































































































Search results

Summary of Contents for HSG320

Reviews:

Related manuals for HSG320

Brands by name

Popular brands

4IPNET HSG320, User Manual

Search results

Summary of Contents for HSG320

Reviews:

Related manuals for HSG320

Brands by name

Popular brands