4IPNET HSG320 User Manual Download Page 41

Page: 41 / 194

User’s Manual

HSG Wireless Hotspot Gateway ENGLISH

4.4.3 Advanced

Advanced Firewall Settings can be enabled to supplement the firewall rules, providing extra security

enhancement against DHCP and ARP traffics traversing the available interfaces of the system.



DHCP Snooping

: When enabled, DHCP packets will be validated against possible threats like DHCP

starvation attack. In addition, the

Trusted DHCP List

(IP/MAC) can be used to specify legitimate DHCP

servers to prevent rouge DHCP server.



ARP Inspection

: When enabled, ARP packets will be validated against ARP spoofing.

Force DHCP

option when enabled, the AP only learns MAC/IP pair information through DHCP

packets. Since devices configured with static IP address does not send DHCP traffic, any

client with static IP address will be blocked from internet access unless its MAC/IP pair is listed

and enabled on the

Static List.

Broadcast

can be enabled to let other AP (with L2 firewall feature) learn the trusted MAC/IP

pairs to issue ARP requests.

Static List

can be used to add MAC or MAC/IP pairs of devices that are trusted to issue ARP

request. Other network nodes can still send their ARP requests; however, if their IP appears

on the static list (with different MAC), their ARP requests will be dropped to prevent

eavesdropping.

If any settings are made, please click

Apply

to save the configuration before leaving this page.

Summary of Contents for HSG320



































































































































































































Search results

Summary of Contents for HSG320

Reviews:

Related manuals for HSG320

Brands by name

Popular brands

4IPNET HSG320, User Manual

Search results

Summary of Contents for HSG320

Reviews:

Related manuals for HSG320

Brands by name

Popular brands