4IPNET HSG320 User Manual Download Page 105

Page: 105 / 194

User’s Manual

HSG Wireless Hotspot Gateway ENGLISH

100

10.9 Restart

To perform system restart, go to:

Utilities

>> Restart

This function allows the administrator to safely restart the HSG, and the process takes approximately three minutes.

Reason

for restarting the system can be entered for record purposes. Click

YES

to restart the HSG; click

to go

back to the previous screen. Do NOT power off during system restart as this might damage the system. If

the

power needs to be turned off, it is highly recommended to restart the HSG first and then turn off the power after

completing the restart process.

Caution:

The connection of all online users to the system will be disconnected when system is in the process of restarting.

Summary of Contents for HSG320



































































































































































































Search results

Summary of Contents for HSG320

Reviews:

Related manuals for HSG320

Brands by name

Popular brands

4IPNET HSG320, User Manual

Search results

Summary of Contents for HSG320

Reviews:

Related manuals for HSG320

Brands by name

Popular brands