3Z TELECOM Antenna W.A.S.P., User Manual

Page: 48 / 59

48
A search prompt window will appear similar to the image shown below.
This search window allows you to search for just the range of sensor information you
are interested in. You can specify:

After time
– by checking the ‘After’ box in the ‘Time Range’ section, the search
will only return sensor information reported after the date and time specified in
the corresponding date/time field to the right.

Before time
– by checking the ‘Before’ box in the ‘Time Range’ section, the
search will only return sensor information reported before the date and time
specified in the corresponding date/time field to the right.

Only Alarms
– you can further narrow the search to report only sensor data
which caused an alarm condition in the Data Collector by checking the ‘Only
return results with active alarms’ in the Alarm Status field.

Antenna WASP - if you are searching through data from multiple sensors within
the
‘Antenna WASP Data’ tab, you can additionally narrow the search to include
only specific WASP sensors by checking the box next to the sensors names.
When you have selected the desired ranges, you may click `Search` and the manager
software will download the sensor data while displaying a progress message similar to
the image below.