3Ware 7000-2 - Escalade RAID Controller, User Manual

Page: 42 / 196

3ware Escalade ATA RAID Controller User Guide
42 www.3ware.com
)LJXUH 3DUDOOHO $7$ 'ULYH ZLWK 6HULDO $7$
&RQYHUWHU ,QVWDOOHG
Check your installation and close the case
1 After all of the drives are connected to the ATA RAID Controller
and it is installed in its slot, verify that the cables do not interfere
with the operation of any other components in the case or block
the flow of cooling air.
2 Close the case and reconnect the power cables.
Check motherboard boot sequence
Using your computer’s Setup utility, ensure that your boot device
precedes the Escalade ATA RAID Controller in the boot sequence.
If you have other disks installed on the motherboard, the ATA
RAID Controller precedes them in boot order.
&%/36$7$ 3DUDOOHO WR 6HULDO &RQYHUWHU
Ch1Hardware.fm Page 42 Wednesday, April 23, 2003 12:20 PM