3Ware 7000-2 - Escalade RAID Controller, User Manual

Page: 80 / 196

3ware Escalade ATA RAID Controller User Guide
80 www.3ware.com
Figure 27. Install Driver
Remove the existing Escalade ATA RAID Controller and
install the new Escalade ATA RAID Controller
Refer to the Hardware Installation chapter.
Reboot the machine
1 Remove the driver diskette from your PC, then restart your sys-
tem. If you don’t remove the diskette, the system may not boot.
2 If you choose to reconfigure your disk arrays, press Alt-3 to
bring up the Disk Array Configuration Utility.
3 Log in at the administrator level and wait for the system to
reboot. You should see a brief splash screen followed immedi-
ately by an “Installation Complete” notification.
4 Partition and format any new disk arrays or independent disks
using Disk Administrator in the remaining steps:
a From the Start menu, choose Programs.