3Ware 3W-6800 - Escalade 6800 RAID Controller, User Manual

Page: 120 / 174

3ware Escalade Storage Switch User Guide
110 www.3ware.com
5 At the Start Installation/System display, select Start Installa-
tion, then select Install Linux from Scratch.
6 Following the installation, when asked to select the kernel,
select the kernel with SMP-support or select the standard kernel.
7 When Lilo is finished installing and the confirmation window
appears, do not continue. Press Ctl-Alt-F2 instead.
8 Proceed to the following section, “Set up the system so driver
will load on boot”.
Set up the system so driver will load on boot
1 Insert the 3ware driver installation diskette for SuSE and type in
the following:
/ # mkdir /mnt2
/ # mount -t msdos/dev/fd0 /mnt2
If you are on a non-SMP system , type:
/ # cp /mnt2/***/initrd /mnt/boot
If you are on an SMP system , type:
/ # cp /mnt2/***/initsmp /mnt/boot/initrd
2 Unmount and eject the 3ware Software Installation diskette from
the floppy drive by entering the following:
/ # umount /mnt2
Edit the lilo.conf file
1 Edit /mnt/etc/lilo.conf. Note that to use vi, you must first set the
LD_LIBRARY_PATH
/ # export LD_LIBRARY_PATH=/mnt/usr/lib
/ # /mnt/usr/bin/vi /mnt/etc/lilo.conf
2 In the lilo.conf file add the line, initrd = /boot/initrd after the
line, image = /boot/vmlinuz.
image = /boot/vmlinuz
initrd = /boot/initrd