3Ware 3W-6800 - Escalade 6800 RAID Controller, User Manual

Page: 76 / 174

3ware Escalade Storage Switch User Guide
66 www.3ware.com
Installing the storage switch on systems that
boot from a different device
Materials required:
• 3ware Windows driver installation diskette
• 3ware CD-ROM
Create disk arrays
Refer to the 3ware Hardware Installation and 3ware Disk Array
Configuration Utility chapters.
Install the 3ware driver
As a Plug and Play device Windows 98/ME will recognize the
Escalade Storage Switch and automatically bring up the Add New
Hardware Wizard, which will guide you in installing the new
3ware driver (see Figure 27). When the Add New Hardware Wiz-
ard screen appears continue to the Install/Update 3ware driver sec-
tion. Perform the following steps only if this Wizard does not
appear on your screen or was cancelled for some reason:
1 Log in after Windows installation is complete and insert the
3ware Windows driver installation diskette.
2 From the Start menu, select Setting, then Control Panel.
3 Double click on Add New Hardware icon. When the Add New
Hardware wizard lists devices that need to be installed, select
the SCSI Controllers.
4 Continue to the Install/Update 3ware driver section.