CLI user manual
9
Switch# inf+<Tab>
Switch# information
1.4.3
Frequent Incorrect Information of Command Lines
All commands typed by users, if it is certificated by grammar, it can run correctly, or users will
be sent incorrect information. Frequent incorrect information is in table 1.4.3 as below:
Table 1.4.3 Frequent incorrect information
English incorrect information
Reason
Invalid Command
Command cannot be found.
Key word cannot be found.
The type of parameter is wrong.
The parameter is beyond the border.
Incomplete Command
Command is not completed.
Too many parameters
Parameter is too much.
1.4.4 History command
Command lines port can provides the function similar to Dos key. It automatic save command lines that
users types in, and users can use these history commands. Detailed operating please check table 1.4.4
as follows:
Table 1.4.4 access history command
Operating
Key
Result
Visit previous history
command
Up <↑>
If it exists earlier command, it is taken out.
Visit next history command
Down <↓>
If it exists later command, it is taken out.
1.4.5 General Command
Regular command is the most frequently used commands, in order to facilitate the operation,
the list and help, quit, exit and reboot command arrangements in all modes.
Table 1.4.5 general command
Operating
Key
Result
List commands of current menu List
In any mode can be executed
Help commands of current
menu
Help
Quit from CLI
Quit
Exit from current menu
Exit
Reboot switch
Reboot
