CLI user manual
26
Tip: This configuration will be validated after restarting
Example: to modify the first groups in Ring3 ring network ports 5, 6
Switch(Ring)#
modify 1 -p 5,6
[OK]
Tip: This configuration will be validated after restarting
9.7
The RSTP configuration
RSTP enabled, can use the following command to set the RSTP.
Table 9.7.1 RSTP to set and modify.
Operating
Command
Description
The
configuration
of RSTP
Config rstp_state
<priority><hellotime>
<delaytime> <maxage>
<priority> --RSTP priority
{0|4096|8192|12288|16384|20480
|24576|28672|32768|36864|40960|
45056|49152|53248|57344|61440}
<hellotime> --RSTP hellotime Range
[1-10]s
<delaytime> --RSTP delaytime Range
[4-30]s
<maxage> --RSTP maxage Range
[6-40]s
Config rstp_port
{1|2|3|4|5|6|7|G1|G2|G3}
<pathcost> <portpriority> <p2p>
<edge><enable>
<pathcost> --Port pathcost Range
[0-200000000]
<portpriority> --Port portpriority
{0|16|32|48|64|80|96|112|128|144|160|
176|192|208|224|240}
<p2p> --Port p2p {no|yes|auto}
<edge> --Port edge {no|yes}
<enable> --Port enable {no|yes}
Modify the
RSTP port
Modify rstp
_state
<options> <parameter>
<options>
-P
--modify priority
{0|4096|8192|12288|16384|20480|
24576|28672|32768|36864|40960|45056|
49152|53248|57344|61440}
-h --modify hellotime Range
[1-10]s
-d --modify delaytime Range
[4-30]s
-m --modify maxage Range
[6-40]s
