CLI user manual
6
1.4 Command line port
The switch provide command lines port and its configuration for user’s easy
configuration and management. Command lines port includes the following features:
1. Local configuration through Console port;
2. Supports history command saving which means it can save 10 pieces. History
commands can be selected by up and down key.
3. User can type in “help” or ”?” to get some help;
4. Supports intelligent complement with Tab when commands input;
5. Command interpreter take the method of partial matching. User can type in
conflict-free key words, such as config command, only need to type in conf.
1.4.1 View of Command Lines
The switch view of command lines aim at configuration of different functions. First of all, the
switch establish connection, then confirmation of user name and password finished, after
enter the correct user name and password, enter “help or ?” in “switch”, enter into system
view, Under the view of system, corresponding view appears after typing indifferent
command.
Table 1.4.1 system view command list
View
Function
Prompt
Enter
Quit
System
-
Switch#
Quit and
return to
user
login
Device
Information
Show or modify device
information, like
software version, IP
address, etc.
Device_information#
Information
Exit and
return to
the view
of
system
Port Setting
Show or modify port
information, like duplex
mode, port enable.
Port_config#
Port
Bandwidth
Management
Show or modify
bandwidth information,
like ingress and egress
bandwidth
configuration.
Bandwidth#
Bandwidth
VLAN
Show or modify
information of VLAN,
Vlan_config#
Vlan
