User Manual
38
Operating method:
1. Enable Ring Group 1 and Ring Group 2; (Hello_time can be disable too, if it enable, time of sending
Hello packet could not be very fast, or it will influence CPU dealing speed.);
2. Set up Port 1 and 2 of Device 101, 102, 103, 104,105 to be Ring Ports in Ring Group 1, Network ID is
1, Ring Type Single; Set up Port 1 and 2 of Device 119, 120, 121,122 to be Ring Ports in Ring Group 1,
Network ID is 2, Ring Type Single;. As shown in figure 5.9.2.13:
(Figure 5.9.2.13)
3. Set up Port 1 and 2 of Device 118 to be Ring Ports in Ring Group 1, Network ID is 2, Ring Type is
Single; Set up Port 4 and 5 of device to be Ring Port in Ring Group 2, Network ID is 3, Ring type is
Dual_homing, as shown in figure 5.9.2.14.
(Figure 5.9.2.14)
4. Set up Port 4 and 5 of Device 106-117 to be Ring Ports in Ring Group 1, Network ID is 3, Ring type is
Dual_homing, as shown in figure 5.9.2.15.
